Output Format
133
•4 holes
ID Card Copy (Copying Both Sides of an ID Card)
This feature allows you to copy both sides of a small undetectable original, such as an ID
card, onto one side of paper.
1
Specify the orientation of the document in
[Original Orientation] on the [Layout
Adjustment] screen.
2
Place the document slightly away from the top left corner of the document glass, and close
the document glass.
Note • Always use the document glass when copying. You cannot use the document feeder with this feature.
• Specify the orientation of the original document correctly.
• If the edges of the image are missing, slightly move the card inward on the document glass so that the
whole image can be scanned.
• When the reduced size is specified to copy an ID card, the machine may copy the ID card in a different
orientation from the original orientation depending on the magnification ratio specified. For
information on the copy magnification ratio for ID Card Copy, refer to "ID Card Copy - Reduce/Enlarge"
(P.355).
For information on how to specify the orientation of a document, refer to "Original Orientation
(Specifying the Orientation of Loaded Documents)" (P.106).
4 Holes (Left) 4 Holes (Top)
4 Holes
(Right)
A4 , B5 , 7.25 x 10.5" , 8.5 x 11" , 16K
A3, B4, 11 x 15", 11 x 17", 8K
To Next Page
Loading...
Need help?
General