3 Copy
72
Auto / Color / Black & White (Selecting the Color for Copying)
This feature allows you to select a color mode.
1
Select [Auto], [Color] or [Black & White].
Auto
Detects if the original document is in color or black and white and prints the copy
accordingly.
Note • If the original color document is in any of the following conditions, the machine may print the copy in
black and white.
- The colored area is too small.
- The colors are too light.
In that case, change a level from the five levels which is used for the machine to recognize color. For
more information, refer to "Output Color Recognition" (P.326).
Color
Copies in full color.
Black & White
Copies in black and white regardless of the colors in the original document.
Note • Some colors may be restricted and may not be used for printing the copy. For more information, refer
to "Account Limit" (P.443).
Lighten/Darken (Adjusting the Copy Density)
This feature allows you to select a copy-density level from seven levels.
1
Use [ ] and [ ] to select a density level.
To Next Page
Loading...
Need help?
General