To Next Page

To Previous Page

20 Using the Internet Fax Service

516

When [SMTP] is selected for [Protocol to Receive E-mail]

Configure the SMTP server.

For information on how to configure the SMTP server, refer to "SMTP Server Settings" (P.368).

For information on how to set the machine's e-mail address when you receive e-mails via SMTP, refer

to "Machine's E-mail Address/Host Name" (P.366).

When [POP3] is selected for [Protocol to Receive E-mail]

Configure the POP3 server.

For information on how to configure the POP3 server, refer to "POP3 Server Settings" (P.368).

For information on how to set the machine's e-mail address when you receive e-mails via POP3, refer

to "Machine's E-mail Address/Host Name" (P.366).

1) Select [Close].

Configure the server settings for sending e-mails.

Note • To send e-mails, SMTP server settings are required. When [POP3] is selected in [Protocol to Receive

E-mail], configure the SMTP server in [Outgoing/Incoming E-mail Settings].

For information on how to configure the e-mail transmission, refer to "SMTP Server Settings" (P.368).

Configure the domain filtering for sending and receiving e-mails as necessary.

For information on how to configure the domain filtering, refer to "Domain Filtering" (P.379).

Set up the S/MIME information.

1) Select [Connectivity & Network Setup].

2) Select [Security Settings].

3) Select [S/MIME Settings], and then set the items.

For more information on how to configure S/MIME settings, refer to "S/MIME Settings" (P.375).

Select [Close] repeatedly until the [Tools] screen is displayed.

Select [Close].

Note • Rebooting the machine may be required depending on the settings. When a message displayed on the

screen, follow the message and reboot the machine.

After the machine reboots, you can print a configuration report to confirm that the settings

of each item.

For information on how to print a configuration report, refer to "Print Reports" (P.276).

Step 3 Testing the Internet Fax

Test the Internet fax transmission from the machine.

Select [Fax/Internet Fax] on the [Home] screen to display the [Fax/Internet Fax] screen.

Select [Internet Fax] from the drop-down menu.

Enter a destination address.

Press the <Start> button to transmit.

Check whether the computer received the e-mail.

If the computer cannot receive the e-mail, refer to "Problem Solving" (P.565).

Dell C7765DN User Manual

Other manuals for Dell C7765DN