To Next Page

To Previous Page

15 Tools

296

System Settings Procedure

To change or customize the system settings, enter the System Administration mode.

This section describes the basic procedures for system settings. The following shows the

reference section for each procedure.

Step 1 Entering System Administration Mode ......................................................................296

Step 2 Entering the System Administrator User ID and Passcode .......................................296

Step 3 Selecting [Tools] ..........................................................................................................297

Step 4 Selecting a Tab on the [Tools] Screen........................................................................297

Step 5 Setting a Feature ..........................................................................................................299

Step 6 Exiting System Administration Mode.........................................................................299

Step 1 Entering System Administration Mode

Press the <Log In/Out> button or the login

information field on the touch screen.

Step 2 Entering the System Administrator User ID and Passcode

To enter the System Administration mode, enter the System Administrator’s User ID. If

[Passcode Entry for Control Panel Login] is set to [On] under [Tools] > [Authentication/

Security Settings] > [Authentication] > [Passcode Policy], you need to enter the passcode.

We recommend that you change the System Administrator’s User ID and passcode

immediately after installing the machine.

For more information on how to change the passcode, refer to "System Administrator Settings"

(P.450).

Enter the system administrator's user ID with

the numeric keypad or the keyboard displayed

on the screen, and select [Enter].

When a passcode is required, select [Next] and

enter the system administrator's passcode, then

select [Enter].

Note • The default user ID is "admin".

• The default passcode is "1111".

• The screen may differ depending on the settings of the machine.

• The <Log In/Out> button is lit when the machine enters the System Administration mode.

<Log In/Out> button

Dell C7765DN User Manual

Other manuals for Dell C7765DN