15 Tools
366
Automatically Configured IPv6 Address
Displays the following addresses automatically assigned.
• Link-local Address
• Auto Stateless Address 1 and Prefix Length
• Auto Stateless Address 2 and Prefix Length
• Auto Stateless Address 3 and Prefix Length
• Auto Gateway Address
IPv6 - IP Filter
Select whether or not to limit IPv6 addresses that can access the machine.
Note • [IPv6 - IP Filter] applies to all features using TCP/IP, such as the Print, Store to Folder, Web
Applications services, and Dell Printer Configuration Web Tool.
• To set the IPv6 addresses that the machine accepts connection from, use [IP Filtering] in Dell Printer
Configuration Web Tool. For more information, refer to "Dell Printer Configuration Web Tool Settings"
(P.461).
• When [IP Filtering] is enabled, make sure to switch the FTP transfer mode to [Active Mode] to transfer
the scanned image from the machine via FTP. You can switch the FTP transfer mode from Dell Printer
Configuration Web Tool.
Machine's E-mail Address/Host Name
Set the e-mail address, host name, and domain name of the machine.
E-mail Address
Enter the E-mail address of the machine with up to 128 single-byte characters.
When receiving E-mail via SMTP
You can set any name for the account (on the left side of @). Set the address section (on the
right side of @), with the combination of the host name and domain name. An alias cannot
be set.
For Example: mymail@myhost.example.com
• Account name: mymail
• Host name: myhost
• Domain Name: example.com
When receiving E-mails via POP3
Enter the POP user name (on the left side of @) and incoming POP3 mail server name in
the address section (on the right side of @). You can set an alias, such as
mymail@example.com.
For Example: mymail@myhost.example.com
• Account name: mymail
Machine Name
Enter the machine name with up to 32 single-byte characters.
Host Name
Enter the host name with up to 32 single-byte characters.
Note • For SMB, only the first 15 single-byte characters will be used as the Host Name.
To Next Page
Loading...
