Operations during Scanning
165
Operations during Scanning
The following describes the operations available during scanning. The following shows the
reference section for each operation.
Stopping the Scan Job............................................................................................................. 165
Previewing the Scanned Images during a Scan Job ............................................................... 166
Changing Scan Settings ..........................................................................................................167
Stopping the Scan Job
To cancel scanning a document, use the following procedure.
1
Press either the <Stop> button on the control
panel or [Delete] on the touch screen.
2
Select [Delete].
If [Delete] does not appear on the screen:
1
Press the <Job Status> button.
To Next Page
Loading...
Need help?
General