Dell C7765DN - Page 350

15 Tools
350
When the default value of [Paper Supply] is set to [Auto Select], [Auto %] cannot be
selected for [Reduce/Enlarge].
For information on the Reduce/Enlarge Preset buttons, refer to "Reduce/Enlarge Presets" (P.357).
Output Color
Set the default value for [Output Color] in the [Copy] screen.
When [No Default] is selected, select the output color in the [Copy] screen before making
copies.
Output Color (Simple Copy)
Set the default value for [Output Color] in the [Simple Copy] screen. You can select from
[Auto Detect], [Color], and [Black & White].
Single Color
Set the default value for [Single Color] in [More] of [Output Color] in the [Copy] screen.
You can select from six preset colors and six custom colors.
For information about custom colors, refer to "Custom Colors" (P.357).
Dual Color - Source Color
Set the default value for [Source Color] that appears when [Dual Color] is selected for
[More] of [Output Color] in the [Copy] screen.
Selecting [Color] enables you to select from six colors.
Dual Color - Target Area Color
Set the default value for [Target Area Color] that appears when [Dual Color] is selected for
[More] of [Output Color] in the [Copy] screen. You can select from seven preset colors and
six custom colors.
For information about custom colors, refer to "Custom Colors" (P.357).
Dual Color - Non-target Area Color
Set the default value for [Non-target Area Color] that appears when [Dual Color] is selected
for [More] of [Output Color] in the [Copy] screen. You can select from seven preset colors
and six custom colors.
For information about custom colors, refer to "Custom Colors" (P.357).
Original Type
Set the default value for [Original Type] on the [Image Quality] screen.
Original Type - Auto (Non-Black & White)
Set the default value for [Original Type] on the [Image Quality] screen.
This is valid when a color other than [Black & White] is selected for [Output Color] in the
[Copy] screen.
Original Type - Auto (Black & White)
Set the default value for [Original Type] in the [Image Quality] screen.
This is valid when [Black & White] is selected for [Output Color] in the [Copy] screen.
Lighten/Darken
Set the default value for [Lighten/Darken] of [Image Options] in the [Image Quality]
screen.