15 Tools
386
Compatible Mode
Uses the Microsoft
®
-compliant mode to process print tickets.
LPD Print Queue
Set the LPD print sequence.
Note • If you change the [LPD Print Queue] setting, the [Receiving Buffer - LPD] setting may automatically be
changed. For more information on Receiving Buffer - LPD Spool, refer to "Receiving Buffer - LPD"
(P.381).
Data Processing Order
Prints jobs in the order of becoming print-ready status after receiving the jobs.
When you print jobs of multiple documents continuously, the machine may preferentially
print the next job in the middle of processing depending on the processing time.
Job Submission Order
Prints jobs in the order of lpr print submission.
Note • This setting is valid only when [Receiving Buffer - LPD] is set to [Spool to Hard Disk]. When any other
setting, printing is performed in [Data Processing Order].
OCR Font Glyphs (0 x 5C)
Allows you to select [Backslash] or [Japanese Yen Sign] to print 0x5C character when the
OCR fonts are used.
To Next Page
Loading...
