2 Product Overview
48
• Detecting human presence by the human motion sensor of the machine
Note • The machine may not immediately exit the Power Saver mode if the machine enters the mode by
pressing the <Power Saver> button and press the button again in five seconds to exit.
When the following device is connected to the machine and a user performs the following
operation, the Low Power mode can be deactivated without pressing the <Power Saver>
button.
• Placing a smart card on the smart card reader
Note • If the machine is in the Sleep mode, however, the Sleep mode will not be deactivated by the operation
above. Set a longer time to elapse until the machine enters the Sleep mode.
1
Press the <Power Saver> button.
To Next Page
Loading...
