23 Problem Solving
660
033-528
[Cause] An error occurred during fax transmission.
[Remedy] Ask the sender to send again.
033-529
[Cause] An error occurred during fax transmission.
[Remedy] Confirm the other machine has a problem, and then execute the operation again.
033-530
[Cause] Received a procedure disabled signal.
[Remedy] Execute the operation again. If the error still is not resolved, contact Customer Support
at dell.com/contactdell.
033-531
[Cause] Received a command rejection signal.
[Remedy] Confirm the condition of the other machine (memory is full, paper has run out, or other
conditions), and execute the operation again.
033-532
033-533
[Cause] An error occurred during fax transmission.
[Remedy] Execute the operation again. If receiving, ask the sender to send again.
033-534
[Cause] The other machine does not offer a feature to print the number of document sets sent.
[Remedy] Do not specify multiple sets.
033-535
[Cause] An error occurred during fax transmission.
[Remedy] Confirm information such as the recipient and folder information, and execute the
operation again.
033-536
033-537
[Cause] An error occurred during fax transmission.
[Remedy] Execute the operation again.
033-538
033-539
033-540
[Cause] An error occurred during fax transmission.
[Remedy] Execute the operation again. If the error still is not resolved, contact Customer Support
at dell.com/contactdell.
033-541
[Cause] The recipient is not specified.
[Remedy] Specify the recipient correctly.
033-543
[Cause] The recipient (fax number) is incorrect.
[Remedy] Enter a correct fax number, and execute the operation again.
033-544
[Cause] The recipient's line is busy.
[Remedy] Wait for a while, and then execute the operation again.
033-546
[Cause] A dial tone was not detected.
[Remedy] Check whether the line is connected correctly.
033-547
[Cause] Communication was terminated by a cause such as pressing the <Stop> button.
[Remedy] No measure is required.
033-548
[Cause] Cannot transmit manually because a line is unavailable.
[Remedy] Establish communication such as by telephone, and execute the operation again.
033-549
[Cause] Cannot use the Fax service because of causes such as memory is insufficient.
[Remedy] Wait for a while, and execute the operation again.
033-550
[Cause] Cannot execute another job because fax communication is in progress.
[Remedy] Wait until the job being communicated completes, and then execute the operation
again.
Status Code Cause and Remedy
To Next Page
