Dell C7765DN User Manual

Status Code
679
127-220
127-221
[Cause] A communication error occurred between the machine and the Print Server.
[Remedy] Disconnect the print server cable, and then securely insert the cable into the connector.
Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power.
127-310
127-311
127-312
127-313
127-314
127-315
127-320
127-337
127-342
127-353
127-354
127-396
127-398
127-399
[Cause] An error occurred in the machine.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the same message is displayed again, contact Customer
Support at dell.com/contactdell.
133-210
133-211
133-212
133-213
133-214
133-215
133-216
133-217
133-218
133-219
133-220
133-221
133-222
133-223
133-224
[Cause] An error occurred during fax transmission.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the error still is not resolved, contact Customer Support at
dell.com/contactdell.
133-226
[Cause] A country/region code not supported by the machine was specified.
[Remedy] Contact Customer Support at dell.com/contactdell.
133-280
133-281
133-282
133-283
[Cause] An error occurred during fax transmission.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the error still is not resolved, contact Customer Support at
dell.com/contactdell.
133-700
[Cause] The staple/hole punch setting was cancelled.
[Remedy] Check whether the staple/hole punch position is correct, and then execute the operation
again.
Status Code Cause and Remedy

Dell C7765DN Specifications

General

Brand	Dell
Model	C7765DN
Category	Printer
Language	English