Installation Procedures
725
1
On your computer, double-click the exe file in the installation tool.
2
Click [Next].
3
Enter the IP address or hostname of your
machine, and then click [Next].
Example: 192.0.2.1
4
Enter the system administrator’s user ID and
password, and then click [Next].
5
Select [Reinstall (Retain settings)] for version
upgrade, or [Remove (Remove settings)] for
uninstallation, and then click [Next].
6
Click [Next].
7
Click [Finish].
Note • Several minutes may take before the
installation process completes.
• If the [Reboot device] check box is selected,
the machine must be rebooted. Click [Finish] to
reboot the machine.
• To uninstall or upgrade this feature from
another machine in succession, check [Install
on another device] and click [Finish]. You can
start from step 2.
To Next Page
Loading...
