Dell EMC ML3 User Manual

Table 31. Locating Management functions (continued)
Task
Menu Navigation
Operator Panel Management GUI
LDAP Authentication, configure Not available with this interface Settings > Security > LDAP
Authentication
Library firmware, update Maintenance > Library Firmware
Upgrade (requires FAT32 format USB
drive)
Library > Actions > Update Library
Firmware
Library logs, export Maintenance > Library Logs
Download (requires FAT32 format
USB drive)
Library > Actions > Export Library
Logs
Library logs, view or clear Maintenance > View Event Ticket
Logs
Library > Events > Actions
Library Information Status Library > Actions
Library Managed Encryption
(KMIP), configure
Not available with this interface Settings > Security > Encryption For
LME, see “Configuring Library
Managed Encryption (KMIP)” on page
70.
Library Verify, run Maintenance > Library Tests Library > Actions > Tests > Library
Verify
List of Known Drives and
Modules, reset
Not available with this interface Settings > Library > Advanced
Logical Libraries, graphical view Not available with this interface Library > Logical Libraries > Actions >
Graphical View
Logical Libraries, Manage (Basic
Mode)
Not available with this interface Library > Logical Libraries > Actions >
Manage Logical Library (Basic Mode)
Logical Libraries, Manage (Expert
Mode)
Not available with this interface Library > Logical Libraries > Actions >
Manage Logical Library (Expert Mode)
Magazines, open See “Accessing cartridges” on page
70.
Library > Modules and Magazine >
Actions > Unlock Magazine
Network settings Configuration > Network Settings Settings > Network > Ethernet
Notifications, configure Not available with this interface Settings > Notifications
Operator Panel, session lock
timeout
Not available with this interface Settings > Security > GUI
Password Policy Not available with this interface Settings > Security > Password Policy
Path Failover license key, add or
delete
Not available with this interface Settings > Library > Licensed Features
Port Settings, modify Not available with this interface Drives > Actions > Modify Port
Settings
Remote Logging (rsyslog),
configure
Not available with this interface Settings > Notifications > Remote
Logging (rsyslog)
Reset, rediscover devices Not available with this interface Settings > Library > Advanced
Reset Internal IP Range Configuration > Reset > Reset
Internal IP Range
Not available with this interface
Reset Library Not available with this interface Library > Actions > Reset Library
Reset Drive Not available with this interface Drives > Actions > Reset Drive
SNMP, configure Not available with this interface Settings > Notifications > SNMP
Managing 65

Dell EMC ML3 Specifications

General

Number of Drives	1
Category	Tape Library
Drive Technology	LTO
Humidity	20% to 80% (non-condensing)
Drive Type	LTO Ultrium
Maximum Capacity	15 TB (compressed)
Interface	6Gb/s SAS
Max Data Transfer Rate	up to 750 MB/s (with compression)
Operating Temperature	10°C to 35°C
Non-operating Temperature	-40°F to 140°F (-40°C to 60°C)