Dell EMC ML3 User Manual

Table 32. Default settings (continued)
Parameter Default
Configuration
Reset Default
Settings
I/O Station/Magazine
I/O Station Enabled x
I/O Station/Magazines Allow
Monitor "User" access
Disabled x
Logical Libraries Disabled (one underlying logical library) All deleted leaving
a single logical
library
NTP/SNTP Setting Disabled NOT reset
Date Blank or existing NOT reset
Time Blank or existing NOT reset
Time Zone GMT NOT reset
Email Notifications (SMTP) Disabled x
SNMP
SNMP v1, v2 Disabled x
Licensed Features (need license key for enablement)
Path Failover Disabled NOT reset
SCSI Defaults
Product Name - Marketing
Name
ML3 x
Library Product ID - INQUIRY
Product ID String
3573-TL x
Library Vendor ID - INQUIRY
Vendor ID String
Dell x
SCSI element addressing Starting element addresses
in decimal:
Slot = 1001
Drives = 1
I/E Elements = 101
Values in hex are:
Slot = 0x3E9
Drives = 0x1
I/E Elements = 0x65
x
Miscellaneous settings
Barcode format returned to host Align left x
Barcode length returned to host Eight leftmost characters x
Language settings English NOT reset
Auto Clean Disabled x
Media Barcode Compatibility
Check
Enabled x
Empty Slot/Unlabeled Cartridge
Detection
Enabled x
Management GUI Timeout 30 minutes x
Drive Defaults
68 Dell EMC ML3 Tape Library: User's Guide

Dell EMC ML3 Specifications

General

Number of Drives	1
Category	Tape Library
Drive Technology	LTO
Humidity	20% to 80% (non-condensing)
Drive Type	LTO Ultrium
Maximum Capacity	15 TB (compressed)
Interface	6Gb/s SAS
Max Data Transfer Rate	up to 750 MB/s (with compression)
Operating Temperature	10°C to 35°C
Non-operating Temperature	-40°F to 140°F (-40°C to 60°C)