Dell S2815dn - Setting the Default Queue; Specifying the Printing Options

Installing Printer Drivers on Linux Computers (CUPS) 109
Setting the Default Queue
You can set the default queue when you add the printer.
1
Select Computer  More Applications... , and select YaST on the Application Browser.
2 Type the administrator password, and click Continue .
YaST Control Center is activated.
3 Select Hardware on YaST Control Cente r, and se lect Printer .
The
Printer Configurations dialog box opens.
4 Click Edit .
A
dialog box to modify the specified queue opens.
5 Confirm that the printer you want to set is selected in the Connection list.
6 Select the Default Printer check box.
7 Confirm the settings, and click OK .
Specifying the Printing Options
You can specify the printing options such as 2-sided printing.
1
Open a web browser.
2 Ty p e http://localhost:631/admin in Location , and press <Enter>.
3 Click Manage Printers .
4 Click Set Printer Options of the printer for which you want to specify the printing options.
5 Specify the required settings, and click Set Printer Options .
6 Ty p e root as the user name, type the administrator password, and click OK .
NOTE: Set the password for authority as the printer administrator before setting the printer queue. If you have not set it, go to
"Setting the Password for Authority as the Printer Administrator."
The message Printer xxx has been configured successfully. appears.
The setting is complete. Execute printing from the application.