Dell S2815dn - Sharpness

310 Copying
Sharpness
To adjust the sharpness to make the copy image sharper or softer than the original:
1
Swipe the screen until Sharpness appears, and then tap Sharpness .
2 Ta p t h e de s i re d s etti ng .
* Denotes the factory default setting.
Reduce / Enlarge
To reduce or enlarge the size of a copied image from 25 to 400 percent when you copy original documents from the
document glass or DADF:
NOTE: When you make a reduced copy, black lines may appear at the bottom of your copy.
1 Swipe the screen until Reduce/Enlarge appears, and then tap Reduce/Enlarge .
2 Tap the desired setting, and then tap OK .
(Inch series)
(mm series)
* Denotes the factory default setting.
NOTE: You can also specify the value in increments of 1 percent from 25 to 400 by tapping – or +.
Sharpen Makes the copy image sharper than the original.
Normal* The clarity of the image is the same as the original.
Soften Makes the copy image softer than the original.
100%*
50%
64% (LedgerLetter)
78% (LegalLetter)
129% (StatementLetter)
154% (StatementLegal)
200%
100%*
50%
70% (A4A5)
81% (B5A5)
122% (A5B5)
141% (A5A4)
200%