Dell S2815dn - Duplex Printing

Printing 285
4 Select the job you want to cancel.
5 Press the <Delete> key.
Duplex Printing
Duplex printing (or two-sided printing) allows you to print on both sides of a sheet of paper. For sizes that are
acceptable for duplex printing, see
" Supported Paper Sizes. "
Duplex Printing With Duplex Unit
1 Click Start  Devices and Printers .
For Windows Vista
®
: Click Start  Control Panel  Hardware and Sound  Printers .
For Windows Server
®
2008: Click Start  Control Panel  Printers .
For Windows Server
®
2008 R2: Click Start  Devices and Printers .
For Windows
®
8/Windows
®
8.1: On the Desktop screen, right-click the bottom left corner of the screen, and then
click
Control Panel  Hardware and Sound  Devices and Printers .
For Windows Server
®
2012/Windows Server
®
2012 R2: On the Desktop screen, right-click the bottom left corner
of the screen, and then click
Control Panel  Hardware  Devices and Printers .
For Windows
®
10: Right-click the Start button, and then click Control Panel  Hardware and Sound  Devices
and Printers
.
2 Right-click the printer and select Printing Preferences .
The
General tab appears.
3 From Paper Source , select the paper tray.
For PCL driver:
Select from
Auto , Tray1 , Tray2 , or MPF .
For PS driver:
Select from
Automatically Select , Tray1 , Tray2 , or MPF .
4 From Duplex , select Flip on Short Edge or Flip on Long Edge .
NOTE: For details on the Flip on Short Edge and Flip on Long Edge options, see "Flip on Short Edge" and "Flip on Long Edge."
5 Click OK .
Using Booklet Print
To use the booklet print feature, select the Enable check box of the Booklet Printing in the Layout tab.
NOTE: When the XML Paper Specification (XPS) or PS driver is used, booklet print is not available.
NOTE: You must select Flip on Long Edge in the Duplex when using the Booklet Print feature.