Dell S2815dn - Fax Settings

250 Understanding the Printer Menus
Fax
Use the Fax menus to configure a variety of fax features.
NOTE: The Fax function cannot be used unless you set up a country code under Country . If Country is not set up, a
message
Set the Country Code appears on the display.
NOTE: Values marked by an asterisk (*) are the factory default menu settings.
Va lu e s:
Fax Settings
The Fax Settings screen appears when is tapped on the Fax screen.
Use Fax Settings to configure a variety of fax features.
Darken / Lighten
Purpose:
To adjust the density to make the copy darker or lighter than the original.
Va lu e s:
2 Sided Scanning
Purpose:
To specify whether to scan both sides of a document.
Va lu e s:
Enter Number Enters the fax number using the keyboard.
Speed Dial
Enters the speed dial number stored in the printer.
Phone Book Individuals Selects a fax number from the local address book.
Groups Selects a group dial number from the local address book.
Network Phone Book Searches a fax number from the server address book.
On Hook Send
*
Sends faxes manually.
Receive Receives faxes manually.
Polling Manually retrieves information from a remote machine.
Darken 3 Works well with light documents or faint pencil markings.
Darken 2
Darken 1
Normal
*
Works well with standard typed or printed documents.
Lighten 1 Works well with dark documents.
Lighten 2
Lighten 3
1 Sided
*
Scans one side of a document.
2 Sided Long Edge Binding
*
Scans both sides of a document bound by the long edge.
Short Edge Binding Scans both sides of a document bound by the short edge.