Dell S2815dn - Network

194 Understanding the Printer Menus
Network
Use the Network menu to change the printer settings affecting jobs sent to the printer through the wired or
wireless network.
NOTE: Values marked by an asterisk (*) are the factory default menu settings.
Wi-Fi
NOTE: The Wi-Fi feature is available on the Dell Cloud Multifunction Printer | H815dw only.
Purpose:
To confirm or specify wireless network settings.
Wi-Fi
Purpose:
To specify whether to enable the Wi-Fi feature.
Va lu e s:
Wi-Fi Status
Purpose:
To confirm the wireless communication status.
Va lu e s:
Wi-Fi Setup Wizard
NOTE: Wi-Fi Setup Wizard is available only when the printer is connected using the wireless network.
Purpose:
To configure the wireless network interface.
Va lu e s:
Off Disables the Wi-Fi feature.
On Enables the Wi-Fi feature.
Status Good
Acceptable
Low
No Reception
SSID Displays the name that identifies the wireless network.
Encryption Type Displays the encryption type.
Select access point Select the access point from the list.
WEP Key When you select an access point using WEP as the
encryption type, enter the WEP key.
Passphrase When you select an access point using WPA, WPA2, or
Mixed as the encryption type, enter the passphrase.
Manual SSID Setup Enter SSID Specifies a name to identify the wireless network. Up to 32
alphanumeric characters can be entered.