162
Dell™ Printer Configuration Web Tool
Wi-Fi
NOTE:
Wi-Fi feature is available only on the Dell Cloud Multifunction Printer | H815dw, when the printer is connected using the
wireless network.
Purpose:
To configure the detailed setting for the wireless network.
To use the printer through wireless connection, be sure to disconnect the Ethernet cable.
NOTE:
Once wireless LAN is activated, wired LAN protocol will be disabled.
Va lu e s:
Wi-Fi Settings Wi-Fi Sets whether to enable the wireless network connections.
SSID Sets the name that identifies the wireless network. Up to 32 alphanumeric
characters can be entered.
Network Type Sets the network type from either Ad-Hoc or Infrastructure.
MAC Address Displays the MAC address of the printer.
Link Channel Displays the channel number of the wireless connection for the printer.
Link Quality Displays the quality of the wireless network connection for the printer.
Security Settings Encryption Select the encryption type from the list.
No Security Sets No Security to configure the wireless
settings without specifying an encryption
type from WEP, WPA-PSK, and WPA-
Enterprise.
WEP Sets the WEP to use through the wireless
network.
WPA-PSK AES/WPA2-PSK
AES
*1, 2
Sets the WPA-PSK AES/WPA2-PSK AES to
use through the wireless network.
WPA-Enterprise
AES/WPA2-Enterprise
AES
*2, 3
Sets the WPA-Enterprise AES/WPA2-
Enterprise AES to use through the wireless
network.
Mixed Mode PSK
*1, 2
Sets the Mixed Mode PSK to use through the
wireless network. Mixed Mode PSK
automatically selects the encryption type
from either WPA-PSK TKIP, WPA-PSK AES,
or WPA2-PSK AES.
Mixed Mode
Enterprise
*2, 3
Sets the Mixed Mode Enterprise to use
through the wireless network. Mixed Mode
Enterprise automatically selects the
encryption type from either WPA-Enterprise
TKIP, WPA-Enterprise AES, or WPA2-
Enterprise AES.
WEP Encryption Select the WEP key code from either Hex or Ascii.
WEP Key 1 Sets the WEP key set used through the wireless network only when WEP
128bit or WEP 64bit is selected for Encryption.
Re-enter WEP Key 1 Enters the WEP key 1 again to confirm it.
WEP Key 2 Sets the WEP key set used through the wireless network only when WEP
128bit or WEP 64bit is selected for Encryption.
Re-enter WEP Key 2 Enters the WEP key 2 again to confirm it.