Dell S2815dn - Page 191

Understanding the Printer Menus 191
A4 Wide
Purpose:
To expand the printable area width.
Va lu e s:
Barcode Mode
Purpose:
To specify whether to enable the barcode mode, which is suitable for barcode printing.
Va lu e s:
NOTE: Be sure to set to Disable after using the barcode mode.
PS
Use the PS menu to change printer settings that only affect jobs using the PostScript 3 Compatible emulation
printer language.
NOTE: Values marked by an asterisk (*) are the factory default menu settings.
PS Error Report
Purpose:
To specify whether the contents of the errors concerning PostScript 3 Compatible page description language are
printed.
The change becomes effective after the printer is turned off and then on again.
Va lu e s:
NOTE: Instructions from the PS driver override the settings specified on the operator panel.
PS Job Time-out
Purpose:
To specify the execution time for one PostScript 3 Compatible job. The change becomes effective after the printer is
turned off and then on again.
Va lu e s:
Off
*
Disables A4 Wide.
On Enables A4 Wide.
Disable
*
Disables the barcode mode.
Enable Enables the barcode mode.
Off Discards the print job without printing an error message.
On
*
Prints an error message before it discards the job.
Off
*
Job time-out does not occur.
On 1 minute
*
An error concerning the PostScript 3 Compatible page description
language occurs if processing is not completed after the specified
time.
Available Range: 1-900 minutes