Dell S2815dn - Page 199

Understanding the Printer Menus 199
Connection Speed
NOTE: Connection Speed feature is available only when the printer is connected using the wired network.
Purpose:
To specify the communication speed and the duplex settings of Ethernet. The change becomes effective after the
printer is turned off and then on again.
Va lu e s:
Protocols
Purpose:
To enable or disable each protocol. The change becomes effective after the printer is turned off and then on again.
Va lu e s:
Auto
*
Detects the Ethernet settings automatically.
10BASE-T Half Uses 10BASE-T Half-duplex.
10BASE-T Full Uses 10BASE-T Full-duplex.
100BASE-TX Half Uses 100BASE-TX Half-duplex.
100BASE-TX Full Uses 100BASE-TX Full-duplex.
1000BASE-T Full Uses 1000BASE-T Full-duplex.
LPD Disable Disables the Line Printer Daemon (LPD) port.
Enable
*
Enables the Line Printer Daemon (LPD) port.
Port9100 Disable Disables the Port9100 port.
Enable
*
Enables the Port9100 port.
FTP Disable Disables FTP port.
Enable
*
Enables FTP port.
IPP Disable Disables IPP port.
Enable
*
Enables IPP port.
SMB TCP/IP Disable Disables SMB TCP/IP port.
Enable
*
Enables SMB TCP/IP port.
WSD Print Disable Disables Web Services on Devices (WSD) print.
Enable
*
Enables Web Services on Devices (WSD) print.
WSD Scan Disable Disables Web Services on Devices (WSD) scan.
Enable
*
Enables Web Services on Devices (WSD) scan.
Network TWAIN Disable Disables Network TWAIN.
Enable
*
Enables Network TWAIN.
SNMP UDP Disable Disables the Simple Network Management Protocol (SNMP) UDP port.
Enable
*
Enables the Simple Network Management Protocol (SNMP) UDP port.
E-mail Alert Disable Disables the E-mail Alert feature.
Enable
*
Enables the E-mail Alert feature.
Dell Printer Configuration
Web Tool
Disable Disables an access to Dell Printer Configuration Web Tool embedded in the
printer.
Enable
*
Enables an access to Dell Printer Configuration Web Tool embedded in the
printer.