Faxing
351
Discard Size When receiving a document as long as or longer than the paper
installed in your printer, you can set the printer to discard any
excess at the bottom of the page. If the received page is outside
the margin you set, it will print on two sheets of paper at the
actual size. When the document is within the margin and
Discard Size
is set to
Auto Reduction
, the printer
reduces the document to fit it onto the appropriate sized paper
and discard does not occur. If
Discard Size
is set to other
than
Auto Reduction
, the data within the margin will be
discarded.
Transmission
Defaults
Auto Redial Setup Redial Attempts You can specify the number of redial attempts to make when the
destination fax number is busy, within the range of 0 to 13. If you
enter 0, the printer will not redial.
Interval of Redial Your printer can automatically redial a remote fax machine if it
was busy. Intervals from 1–15 minutes can be entered.
Resend Delay You can specify the interval between transmission attempts within
the range of 3 to 255 seconds. The default is 8 seconds.
Tone/Pulse You can select the dialing type.
•Tone
•
Pulse(10PPS)
•
Pulse(20PPS)
Prefix Dial
You can specify whether or not to set a prefix dial number. When
you set
Prefix Dial
to
On
, the number set in
Prefix
Dial Number
dials before any auto dial number is started. It is
useful for accessing the Private Automatic Branch Exchange
(PBX). You can set a prefix dial number of up to five digits.
Fax Cover Page
You can set whether to attach a cover page to faxes when sending
faxes.
Fax Header
Prints the sender’s information on the header of faxes.
Ta p
Off
to turn this feature off.
Ta p
On
to turn this feature on.
Note that if United States is selected for the setting of Country,
this option does not appear on the menu. The setting is fixed to
On and cannot be changed.
For information on the country setting, see "Setting Your
Country."
ECM
You can set whether to enable or disable the ECM (Error
Correction Mode).
Modem Speed
You can set the modem speed.
Display Manual
Fax Recipients
You can set whether to display the fax number of the recipient on
the
Sending Fax
screen when manually sending a fax.
Fax Reports Fax Activity
You can set whether to automatically print a fax activity report
after every 50 incoming and outgoing fax communications.
Fax Transmit
You can set whether to print a transmission result after a fax
transmission.
Fax Broadcast
You can set whether to print a transmission result after a fax
transmission to multiple locations.
Option Description
To Next Page
Loading...
Need help?
General
Weight and Dimensions
