Dell S2815dn User Manual

Appendix 535
USA/Canada Wi-Fi Warnings
Class B:
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/ TV technician for help.
CAUTION:
Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to
operate the equipment.
Labeling Requirements
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
RF Exposure Warning
This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used
for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not
be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be
provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure
compliance.
Canada, Industry Canada (IC) Notices
This Class B digital apparatus complies with Canadian ICES-003 and RSS-210.
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device
must accept any interference, including interference that may cause undesired operation of the device.

Dell S2815dn Specifications

General

Secure printing	Yes
Print technology	Laser
Maximum resolution	1200 x 1200 DPI
Time to first page (black, normal)	7 s
Print speed (black, normal quality, A4/US Letter)	40 ppm
Duplex print speed (black, normal quality, A4/US Letter)	22 ppm
Maximum copy resolution	- DPI
Maximum number of copies	99 copies
N-in-1 copy function (N=)	2
Copy speed (black, normal quality, A4)	40 cpm
Scan to	E-mail, FTP, SMB, USB
Scanner type	Flatbed & ADF scanner
Maximum scan area	216 x 297 mm
Output color depth	24 bit
Scan speed (color)	17 ppm
Image formats supported	JPEG XR
Maximum scan resolution	9600 x 9600 DPI
Document formats supported	PDF
Faxing	Mono faxing
Fax memory	4 MB
Modem speed	33.6 Kbit/s
Digital sender	-
Maximum duty cycle	80000 pages per month
Recommended duty cycle	700 - 4000 pages per month
Page description languages	Microsoft XPS, PCL 5e, PCL 6, PDF 1.7, PostScript 3
Cabling technology	10/100/1000Base-T(X)
Authentication method	HTTP, HTTPS, TLS 1.2, SNMP (v1 / v2 / v3), MIBv2, BOOTP, DHCP, RARP, Auto IP, WINS, DNS, Bonjour (mDNS), Telnet
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Mobile printing technologies	Apple AirPrint, Dell Mobile Print, Google Cloud Print
Supported network protocols (IPv4)	IPSEC w/ IPv4
Supported network protocols (IPv6)	IPSEC w/ IPv6
Internal memory	1024 MB
Card reader integrated	No
Sound pressure level (printing)	52.9 dB
Control type	Touch
Product color	Black
Display diagonal	4.3 \
Market positioning	Business
Paper input type	Paper tray
Total input capacity	250 sheets
Total output capacity	150 sheets
Maximum input capacity	900 sheets
Multi-Purpose tray input capacity	100 sheets
Auto document feeder (ADF) input capacity	50 sheets
Paper tray media types	Plain paper, Pre-Printed, Recycled paper
Non-ISO print media sizes	Executive (184 x 267mm), Folio (media size), Legal (media size), Letter (media size), Statement (140 x 216mm)
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5
Maximum ISO A-series paper size	A4
Standard interfaces	USB 2.0
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Server operating systems supported	Windows Server 2008, Windows Server 2008 R2, Windows Server 2012, Windows Server 2012 R2
Operating altitude	0 - 3100 m
Storage temperature (T-T)	0 - 35 °C
Operating temperature (T-T)	10 - 32 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	15 - 85 %
Certification	EN 60950-1/IEC 60950-1; EN 55022 (Class B) EN55024 EN61000-3-2 (Class A) EN 61000-3-3 CE Mark (EU) UL 60950-1 / CAN/CSA-C22.2 No. 60950-1-07; ICES-003 (Canada) US CFR Title 47 FCC Part 2 and 15B Part 15C and Part 68 FDA/DHHS (21CFR Chapter 1 Subchapter J RCM (Australia) Telepermit (New Zealand) Singapore Mark SABS/ICASA (South Africa) NOM NYCE (Mexico) GS Mark (Germany) and other certifications required by individual country. WHQL Citrix SAP Novell YES USB Google Cloud Print Mopria AirPrint
Sustainability certificates	Blue Angel, RoHS, ENERGY STAR
AC input voltage	110 - 120 V
AC input frequency	50 - 60 Hz
Power consumption (off)	0 W
Power consumption (sleep)	14 W
Power consumption (standby)	52 W
Power consumption (average operating)	610 W

Weight and Dimensions

Depth	556 mm
Width	557 mm
Height	644 mm