Installing Printer Drivers on Windows
®
Computers
93
4
Select the printer you want to install from the printer list, and then click
Next
. If the target printer is not displayed
on the list, click the (Refresh) button to refresh the list or click
add printer manually
to add a printer to the list
manually. You may specify the IP address and port name at this point.
If you have installed this printer on the server computer, select the
I am setting up this printer on a server
check
box.
NOTE:
When using AutoIP,
0.0.0.0
is displayed in the installer. Before you can continue, you must enter a valid IP
address.
NOTE:
If Windows Security Alert is displayed in this step, select Unblock or Allow access, and then continue the
procedure.
5
Specify the printer settings, and then click
Next
.
a
Enter the printer name.
b
If you want to set the printer as the default printer, select the
Set this printer as default
check box.
c
If you want to install the PostScript 3 Compatible printer driver, select the
PS Driver
check box.
If you want to install the Fax Driver, select the
Fax Driver
check box.
d
If you want other users on the network to access the printer, select
Share this printer with other computers on
the network
, and then enter a share name that users can identify.
6
Select the software and documentation you want to install, and then click
Install
. If you want to change the
installation destination, click
Change Destination Folder
and specify a new location.
7
Click
Finish
to exit the wizard when the
Ready to Print!
screen appears.
If you want to verify installation, click
Print Test Page
before clicking
Finish
.
For installing XML Paper Specification (XPS) printer driver
NOTE:
XML Paper Specification (XPS) driver is supported on Windows Vista
®
or later.
Windows Vista
®
or Windows Vista
®
64-bit Edition
1
Extract the following zip file to your desired location.
D:\Drivers\XPS\Win_7Vista\XPS-V3_H815dw_S2815dn.zip
(where D is the drive letter of the
optical drive)
2
Click
Start
Control Panel
Hardware and Sound
Printers
.
3
Click
Add a printer
.
4
Click
Add a network
,
wireless or Bluetooth printer
.
5
Select printer and click
Next
, or click
The printer that I want isn't listed
.
6
Select
Add a printer using a TCP/IP address or host name
, and then click
Next
.
7
Select
TCP/IP Device
from
Device type
, and enter the IP address for
Hostname or IP address
, and then click
Next
.
If the
User Account Control
dialog box appears, click
Continue
.
NOTE:
If you are an administrator on the computer, click Continue; otherwise, contact your administrator to continue the
desired action.
8
Click
Have Disk
to display the
Install From Disk
dialog box.
9
Click
Browse
, and then select the inf file in the folder extracted in step 1.
10
Click
OK
.
11
Select your printer name and click
Next
.
To Next Page
Loading...
