Revision Jan. 2007, MDE2, SW V1.05 5-1
Chapter 5 Parameters
The VFD-M-D parameters are divided into 9 groups by property for easy setting. In most applications,
the user can finish all parameter settings before start-up without the need for re-adjustment during
operation.
The 9 groups are as follows:
Group 0 User Parameters
Group 1 Basic Parameters
Group 2 Motor and Feedback Function Parameters
Group 3 Door Open Parameters
Group 4 Door Close Parameters
Group 5 Multi-Step Speed and PLC Parameters
Group 6 Digital Output Parameters
Group 7 Protection and Special Parameters
Group 8 Communication Parameters
To Next Page
Loading...
