Delta VFD-M-D series User Manual

Chapter 5 Parameters|VFD-M-D Series
5-58 Revision Jan. 2007, MDE2, SW V1.05
 When executing demo mode, it will go to the next demo after this setting.
 When executing demo mode, it will count once after finishing one action of door open and
close.
5 - 16 Clear Demo Times
Factory Setting: 00
Settings 00 Disable
01 Enable
 It will clear demo times to 0 when this parameter is set to 01.
5 - 17 1st Step Speed Frequency Unit: 0.01
5 - 18 2nd Step Speed Frequency Unit: 0.01
5 - 19 3rd Step Speed Frequency Unit: 0.01
5 - 20 4th Step Speed Frequency Unit: 0.01
5 - 21 5th Step Speed Frequency Unit: 0.01
5 - 22 6th Step Speed Frequency Unit: 0.01
5 - 23 7th Step Speed Frequency Unit: 0.01
5 - 24 8th Step Speed Frequency Unit: 0.01
5 - 25 9th Step Speed Frequency Unit: 0.01
5 - 26 10th Step Speed Frequency Unit: 0.01
5 - 27 11th Step Speed Frequency Unit: 0.01
5 - 28 12th Step Speed Frequency Unit: 0.01
5 - 29 13th Step Speed Frequency Unit: 0.01
5 - 30 14th Step Speed Frequency Unit: 0.01
5 - 31 15th Step Speed Frequency Unit: 0.01
5 - 32 16th Step Speed Frequency Unit: 0.01
Factory Setting: 0.00
Settings 0.00 to 400.0 Hz
5 - 14
Waiting Time for Next Demo
Unit: 1
Settings
0.1 to 999.9sec
Factory Setting: 2.0
5 - 15
The Record for Demo Times
Unit: 1
Settings
00 to 9999
Factory Setting: ##

Delta VFD-M-D series Specifications

General

Brand	Delta
Model	VFD-M-D series
Category	Controller
Language	English