Chapter 5 Parameters|VFD-M-D Series
5-22 Revision Jan. 2007, MDE2, SW V1.05
2nd step
5-18
Frequency
1st step
5-17
1
3rd step
5-19
23
5th step
6th step
7th step
4thstep
14th step
13th step
12th step
11th step
10th step
9th step
8th step
5-20
5-21
5-22
5-23
5-24
5-2
5-26
5-27
5-28
5-29
5-30
4 5 6 7 8 9 1011121314
15th step
16th step
5-31
5-32
15 16
03 Multi-step control mode 2
The drive is controlled by sensorless control. For operating the door, it uses three multi-input
(level trigger) and operation direction (FWD/REV) to deal with speed switch and limit switch to
deal with completed position. (4th logic signal: open: 0, close: 1)
5-19
3rd step
speed
5-27
11th step
speed
Door Close Limit
0.0%
5-17
1st step
speed
5-25
9th step
speed
5-18
2nd step
speed
5-26
10th step
speed
5-20
4th step
speed
5-21
5th step
speed
5-30
14th step
speed
5-29
13th step
speed
5-28
12th step
speed
Open Door (REV)
Close Door (FWD)
5-22
6th step
speed 5-23
7th step
speed
5-24
8th step
speed
5-32
16th step
speed5-31
15th step
speed
Door Open Limit
100.0%
04 Multi-step control mode 3
The drive is controlled by sensorless control. For operating the door, it switches speed by
external signal and uses limit switch to deal with completed position. The signals must be edge