4-4
95-8533
18.2
Moving within the Main Menu is done by using
the NEXT or PREVIOUS pushbuttons located
on the controller’s front panel. The menu
options will scroll upward (NEXT Pushbutton)
or downward (Previous Pushbutton) while the
Main Menu name remains stationary. When
the desired menu option is selected by the “>”
indicator, the ENTER pushbutton is pressed
to advance the menu display to the desired
information set.
NOTE
Pressing the CANCEL pushbutton from
within any sub-menu returns the display
to the Main Menu. The display will also
return to the Main Menu if left unattended
for a period of 20 minutes. If an alarm
or trouble condition is present after 20
minutes, the display will change to the
existing Alarm or Trouble message.
DISPLAY ALARMS displays a list of existing
Alarms and Trouble conditions. Moving within
this menu is done by using the NEXT or
PREVIOUS pushbuttons.
NOTE
Multiple alarm information can be viewed
by pressing the NEXT or PREVIOUS
pushbuttons. Pressing CANCEL will
return the menu to the DISPLAY
ALARMS menu.
DISPLAY DEVICES displays device
information on all devices on the LON loop.
Device tag name, type, and node address are
displayed.
Pressing the NEXT or PREVIOUS pushbuttons
allows cycling through devices. Pressing the
CANCEL pushbutton will return the display to
the Main Menu.
DEVICE TAG NAMES displays device tag
name information for all devices on the LON
loop.
Pressing the NEXT or PREVIOUS pushbutton
allows cycling through devices. Pressing the
CANCEL pushbutton will return the display to
the Main Menu.
SET TIME AND DATE provides access to
configuration controls for system clock and
date settings.
NOTE
When the Set Time and Date menu
opens, the current hour will ash.
To move within this menu, press the ENTER
pushbutton until the desired property is
flashing. To set the desired property value,
press the NEXT Pushbutton to increase or
PREVIOUS Pushbutton to decrease the value.
When the desired value is displayed, press the
ENTER pushbutton. This will advance the menu
to the next property and it will flash. When all
desired properties have been entered, press
the ENTER pushbutton until the message
“Press ENTER to Save” is displayed. When
the ENTER pushbutton is pressed, the settings
are saved and the menu changes back to the
MAIN MENU.
>Display Alarms
Display Devices
Device Tagnames
Main Menu
Tag Name
Alarm Description
Time & Date ack
Alarm Type Off/On
Add:63 UV / IR Detect
No Fault
Z398-63 U / I
11:20:52
Set Time & Date
Jul 29 / 2002
Controller
Z398-80 X
Device Tagnames
To Next Page
Loading...
