Develop ineo 161 - Printer Section: Black Spots

Field Service Ver. 1.0 Apr. 2005 17. Image quality problem
171
ineo 161 ineo 210
Troubleshooting
17.2.17 Printer Section: Black spots
A. Typical Faulty Images
B. Troubleshooting Procedure
4011T521AA
Step Check Result Action
1 Toner is present along the paper path. YES • Clean.
2 PC Drum is dirty or scratchy. YES • Clean or change.
3
Tip of the PC Drum Paper Separator Finger is dirty,
scratchy, deformed, worn, or damaged.
YES • Clean or change.
4 Fusing Roller is dirty or scratchy. YES • Clean or change.
5
Tip of the Fusing Paper Separator Finger is dirty, scratchy,
deformed, worn, or damaged.
YES
• Clean or change Fusing
Paper Separator Fin-
gers and finger springs.
6 The image changes when “VG Adjust” is executed. YES
• Readjust. For details,
see ADJUSTING/SET-
TING.