Field Service Ver. 1.0 Apr. 2005 3. Periodical check
9
ineo 161
ineo 210
Maintenance
3.2 Concept of parts life
K = 1,000 copies
*1: The Service mode can be used to set either enable or disable the initiation of a new
copy/print cycle.
A. Conditions for Life Specifications Values
• The life value represents the number of copies made in the conditions specified in the
table shown below, or a value translated to a corresponding number of copies made. It
may therefore vary depending on the conditions, in which the copiers are used among
different users.
Description
Life value
(Specifica-
tion value)
New Copy/Print
Cycle Inhibited
PC Drum
The distance traveled by the PC Drum is con-
verted to a corresponding number of printed
pages of A4 paper at 2P/J.
40 K
Not inhibited *1
Cleaning Blade 40 K
PC Drum Charge
Corona
40 K
Developer 40 K
Image Transfer
Assy
The number of sheets of paper fed out of the
copier is counted.
150 K Not applicable
Paper Dust
Remover Assy
40 K Not applicable
Fusing Unit 150 K Not applicable
Item Description
Copying type 2P/J
Paper size A4
Original density B/W 6%
To Next Page
Loading...
