9. Adjustment item list Field Service Ver. 1.0 Apr. 2005
78
ineo 161
ineo 210
Adjustment / Setting
NOTE
• Before executing a Memory Clear, be sure to take notes of the settings and adjust-
ment data of Utility, Tech. Rep., Security, and Adjust modes. After the Memory
Clear has been executed, re-enter those data.
• The following data of “Adjust” are indicated at the factory on the Adjust Label
located inside the Front Door (The other side of the Toner Replacement Label).
(PRN Main Regist/PRN Sub Regist/CCD Main Zoom/CCD Sub Zoom/CCD Main
Regist/CCD Sub Regist)
• The ATDC value at the time of setting up of the PC Drum Unit is also entered on the
Adjust Label at installation.
• The setting value after ATDC Adjustment is written down in a Adjust Label.
To Next Page
Loading...
