Configuration Menu Overview2-38
[BOOTP] Settings [DISABLE] / [ENABLE]
If there is a BOOTP server on the
network, specify whether the IP
address and other network informa-
tion is automatically assigned by
the BOOTP server.
[ARP/PING] Settings [DISABLE] / [ENABLE]
Select whether or not the ARP/
PING command is used when the
IP address is assigned.
[HTTP] Settings [DISABLE] / [ENABLE]
Select whether or not to enable
HTTP.
[FTP SERVER] Settings [DISABLE] / [ENABLE]
Select whether or not to enable the
FTP server.
[FTP TX] Settings [DISABLE] / [ENABLE]
Select whether or not to enable the
FTP client.
[SMB] Settings [DISABLE] / [ENABLE]
Select whether or not to enable
SMB.
[BONJOUR] Settings [DISABLE] / [ENABLE]
Select whether or not to enable
Bonjour.
[DYNAMIC DNS] Settings [DISABLE] / [ENABLE]
Select whether or not to enable
Dynamic DNS.
[IPP] Settings [DISABLE] / [ENABLE]
Select whether or not to enable IPP.
d
If [HTTP] is set to [DISABLE],
[IPP] cannot be set.
To Next Page
Loading...
