Configuration Menu Overview 2-39
[RAW
PORT]
[DISABLE/
ENABLE]
Settings [DISABLE] / [ENABLE]
Select whether or not to enable the
raw port.
[BIDIRECTIONAL] Settings [DISABLE] / [ENABLE]
Select whether or not to enable raw
port bidirectional communication.
[SLP] Settings [DISABLE] / [ENABLE]
Select whether or not to enable
SLP.
[SNMP] Settings [DISABLE] / [ENABLE]
Select whether or not to enable
SNMP.
[WSD PRINT] Settings [DISABLE] / [ENABLE]
Select whether or not to enable
WSD printing.
[IPSEC] Settings [DISABLE] / [ENABLE]
Select whether or not to enable
IPsec.
[IP
ADDR.
FILTER]
[ACCESS PER.] Settings [DISABLE] / [ENABLE]
Specify access permissions for IP
address filtering.
[ACCESS
REFUSE]
Settings [DISABLE] / [ENABLE]
Specify access blocking for IP
address filtering.
To Next Page
Loading...
