Configuration Menu Overview2-40
[IPv6] [DISABLE/
ENABLE]
Settings [DISABLE] / [ENABLE]
Select whether or not to enable
IPv6.
[AUTO SETTING] Settings [YES] / [NO]
Select whether or not to enable the
IPv6 auto setting.
[LINK LOCAL] Displays the link-local address.
[GLOBAL
ADDRESS]
Displays the global address.
[GATEWAY
ADDRESS]
Displays the gateway address.
[NETWARE] Settings [DISABLE] / [ENABLE]
Select whether or not to enable
NetWare.
[APPLETALK] Settings [DISABLE] / [ENABLE]
Select whether or not to enable
AppleTalk.
[SPEED/DUPLEX] Settings [AUTO] / [10BASE FULL]
/ [10BASE HALF] /
[100BASE FULL] /
[100BASE HALF] /
[1000BASE FULL]
Specifies the transmission speed
for the network and the transmis-
sion method for bi-directional trans-
mission.
[IEEE802.1X] Settings [DISABLE] / [ENABLE]
Select whether or not to enable
IEEE802.1X.
To Next Page
Loading...
