Develop ineo+ 25 - Page 68

Configuration Menu Overview2-42
[POP
BEFORE
SMTP]
[DISABLE/
ENABLE]
Settings [DISABLE] / [ENABLE]
Select whether or not to enable
POP Before SMTP.
If [ENABLE] is selected, specify the
time (between 0 and 60 seconds).
The default setting is [1sec].
[POP3 SERVER
ADDR.]
Specify the host name or IP
address for the POP3 server used
for authentication with POP Before
SMTP.
The default setting is [0.0.0.0].
[POP3 PORT NO.] Settings 1-65535 (Default: [110])
Specify the port number used for
communicating with the POP3
server.
[POP3 TIMEOUT] Settings 30-300 sec (Default: [30
sec])
Select the amount of time (in sec-
onds) until the connection with the
POP3 server times out.
[POP3 ACCOUNT] Specify the user name (up to 63
characters) used for authentication
with POP3 server.
[POP3 PASS-
WORD]
Specify the password (up to 15
characters) used for authentication
with POP3 server.
[SMTP
AUTH.]
[DISABLE/
ENABLE]
Settings [DISABLE] / [ENABLE]
Select whether or not to enable
SMTP authentication.
[SMTP USER
NAME]
Specify the user name (up to 63
characters) used for SMTP authen-
tication.
[SMTP PASS-
WORD]
Specify the password (up to 15
characters) used for SMTP authen-
tication.