Configuration Menu Overview 2-43
[LDAP
SET-
TING]
[DISABLE/ENABLE] Settings [DISABLE] / [ENABLE]
Select whether or not to enable the
LDAP function.
[LDAP SERVER ADDR.] Specify the address (up to 64 char-
acters) of the LDAP server.
The default setting is [0.0.0.0].
[LDAP PORT NO.] Settings 1-65535 (Default: [389])
Specify the port number of the
LDAP server.
d
The default setting is [636]
when [SSL SETTING] is set
to [ENABLE].
[SSL SETTING] Settings [DISABLE] / [ENABLE]
Select whether or not to enable
SSL.
[SEARCH BASE] Specify the search starting point
(up to 64 characters) in a hierarchi-
cal structure arranged on the LDAP
server.
[ATTRIBUTE] The conditions for searches can be
specified as a name or e-mail
address (up to 32 characters).
The default setting is [cn].
[SEARCH METHOD] Settings [BEGIN] / [CONTAIN] /
[END]
The specified characters can be
searched for at the beginning,
within or at the end.
[LDAP TIMEOUT] Settings 5-300 sec (Default: [60
sec])
Specify the maximum wait time
during a search.
[MAX.SEARCH RESULTS] Settings 5-100 (Default: [100])
Specify the maximum number of
destinations displayed after a
search.
To Next Page
Loading...
