19
TECHNICAL DATA
148 AXH1157-UK (ENG) L3500 L4700 F7000 [FPT S3A]
19.4 - Environmental conditions
Although the vehicle and the equipment can be used in several different situations, however, it is necessary to
observe, as a precautionary measure, compliance with minimum standards of operation as specified below:
Parameter Allowed values
Operating temperatures from -20°C to +40 °C
(from -4 °F to 104 °F)
Average daily temperature < +40 °C
(< 104 °F)
Storage temperature from -25°C to +50 °C
(from -13 °F to 122 °F)
Humidity from 20 % to 95 %
Altitude < 2500 m
(< 8200 ft)
Table1: Environmental conditions table
19.5 - Electromagnetic Interference
In the case of additional equipment installed by the customer, the user must verify if the installation causes
interference of any kind with the tools of the vehicle; if so, the user must correct such interferences.
It is essential to pay particular attention to mobile devices such as radio communications (telephones) that must be
installed by trained service technicians must use externally mounted antennas.
In general, it should be kept in mind that any additional electrical equipment installed must comply with the
regulations in the country of use of the vehicle.
19.6 - Radiations
The machine, in conditions of normal use, does not produce any type of radiation, ionizing and non ionizing, that
can cause problems to the operator.
To Next Page
Loading...