Dieci L3500 - 20 Control and Maintenance Logs; Type of Logs; Control Log; Maintenance Log

20
CONTROL AND MAINTENANCE LOGS
152 AXH1157-UK (ENG) L3500 L4700 F7000 [FPT S3A]
The Control Log and Maintenance Log are to be considered as integral parts of the machine and equipment.
These logs must therefore accompany the machine and equipment for their life, to final disposal.
20.1 - Type of logs
20.1.1 - Control log
On the Control Log are recorded the main checks on the safety devices of the equipment, recommended by
Dieci
S.r.l.
, with the related deadlines.
These checks ensure the proper operation of the safety devices.
NOTE
The checks specified in the Control Log are in addition to the routine maintenance described in the
Maintenance Log.
20.1.2 - Maintenance Log
On the Maintenance Log are recorded all scheduled maintenance with timelines, referred to the use in normal, and
not heavy,conditions. Such maintenance interventions allow to keep the machine or the equipment in the best
efficiency conditions.
The scheduled maintenance intervals frequency must be reduced even to daily, if necessary, in particularly heavy
working conditions (humidity, mud, sand, high dust level, etc ...).
NOTE
Consult the
DIECI
service center to establish appropriate timelines when working in particularly heavy
environments.
20.2 - Instructions for compiling the logs
20.2.1 - Warnings on the control log
• The log must be prepared in accordance with the requirements imposed by the Essential Safety Requirement
4.4.2.b Annex I of the Machinery Directive 2006/42/EC, in order to preserve evidence of the proper conduct of all
the inspection and maintenance activities concerning the machine safety.
• In the log, in addition to all the activities relating to the life, use and maintenance of safety systems of the
machine (replacement of parts, overhauls, breakdowns, etc.) it is necessary to record all the checks required by
the regulations in force in the country where the machine is used.
• It is also necessary that the name of the verifier technician and date of intervention are clearly identifiable.
• It is recommended to prepare, update and preserved with care, for the entire life of the machine or equipment,
the control log.
NOTE
Here following there are some pages to allow compiling such logs.
Consult the Dieci s.r.l. service center to obtain more information regarding the availability of control and
maintenance logs.