Digi SM-720 - Page 125

SM-500V2 Service Manual Edition 5
123
SPEC 15: SELECTION OF TURN OVER PRINTING FOR ADV MESSAGE
0: NO
1: YES
SPEC 16: EXIT FROM ' CHANGE ' MODE WITHIN SPECIFIED INTERVAL
0: NO
1: 3 SECOND
2: 6 SECOND
3: 10 SECOND
4: 15 SECOND
SPEC 17: SELECTION OF ORDERING MONTH, DATE AND YEAR FOR PRINT
0: M / D / Y
1: D / M / Y
2: Y / M / D
3: NOT USED
SPEC 18: SELECTION OF 1 / 2 LINE ( S ) COMMODITY NAME ON RECEIPT
0: 2 LINES
1: 1 LINES
SPEC 19: LABEL PRINTING BY CLERK KEY
0: NO PRINT
1: PRINT WITH ACCUMULATION
2: PRINT WITHOUT ACCUMULATION
SPEC 20: SELECTION OF TOTAL LABEL PRINTING
0: NO PRINT
1: PRINT
SPEC 21: SELECTION OF PRINTING OPERATOR NAME ON RECEIPT AND LABEL
0: CODE ONLY
1: NAME
SPEC 22: SELECTION OF RECEIPT PAPER WIDTH
0: 60 mm
1: 40 mm
2: 50 mm
SPEC 23: MANUAL PRICE ENTRY FOR PRINTING OR ACCUMULATION
0: ALLOW
1: INHIBIT
SPEC 24: SELECTION OF DEFAULT LABEL FORMAT FOR ITEM PRINTING
STANDARD U1,CA STANDARD U1,CA
0: T1 A 12: S T7
1: T2 B 13: A T8
2: T3 C 14: B T9
3: T4 U2 15: C T10
4: T5 U3 16: F1 F1
5: T6 U4 17: F2 F2
6: T7 U5 18: F3 F3
7: T8 U6 19: F4 F4
8: T9 U7 20: F5 F5
9: T10 U8 21: F6 F6
10: T11 T5 22: F7 F7
11: T12 T6 23: F8 F8
SPEC 25: SELECTION OF DEFAULT LABEL FORMAT FOR TOTAL PRINTING
STANDARD U1,CA STANDARD U1,CA
0: T1 A 12: S T7
1: T2 B 13: A T8