Digi SM-720 - Page 152

SM-500V2 Service Manual Edition 5
150
1: ALLOW
SPEC 642: SELECTION OF TARE DISPLAY FOR ONE-TOUCH-TARE
0: ALLOW
1: INHIBIT
SPEC 643: SELECTION OF WEIGHT RANGE OF NON - WEIGH ITEMS
0: ONLY NET 0d
1: UNDER NET 0d
2: UNDER NET 4d
3: GROSS < 1d
4: ALWAYS
SPEC 644: SELECTION OF WEIGHT STABILITY CONDITION
0: LOOSE
1: NORMAL
2: TIGHT
3: STRINGENT
SPEC 645: SELECTION OF WEIGHT RANGE FOR REGISTRATION MODE PRINTING
0: OVER NET 5d & OVER GROSS 21d & WEIGHT STABILITY
1: OVER NET 1d AND WEIGHT STABILITY
2: OVER NET 19d AND WEIGHT STABILITY
3: OVER NET 20d AND WEIGHT STABILITY
SPEC 646: SELECTION OF WEIGHT RANGE FOR PREPACK
0: OVER NET 5d & OVER GROSS 21d & WEIGHT STABILITY
1: OVER NET 1d AND WEIGHT STABILITY
2: OVER NET 19d AND WEIGHT STABILITY
3: OVER NET 20d AND WEIGHT STABILITY
SPEC 647: SELECTION OF PLU TARE
0: ALLOW
1: INHIBIT
SPEC 648: SELECTION OF ITEM PRINT WHEN TARE
0: ALLOW
1: INHIBIT
SPEC 649: SELECTION OF TAX ROUNDING METHOD
0: ROUNDING
1: TRUNCATION
SPEC 650: SELECTION OF CHECKING SPAN SWITCH FOR INTERNAL COUNT
0: NO CHECK
1: CHECK
SPEC 651: SELECTION OF CERTAIN FUNCTION KEY ORDER
0: FUNCTION KEY PRECEDE NUMERIC KEY
1: NUMERIC KEY PRECEDE FUNCTION KEY
SPEC 652: SELECTION OF ANGLE ROTATION FOR CERTAIN ITEMS PRINTING
0: ANTI-CLOCKWISE
1: CLOCKWISE
SPEC 653: SELECTION OF TOTAL DISCOUNT
0: ALLOW
1: INHIBIT
SPEC 654: SELECTION OF PACKED DATE FUNCTIONS IN MANUAL MODE
0: INHIBIT
1: ALLOW