Digi SM-720 - Method 2 for Country Setting

SM720 Service Manual Edition 5
20
KEY TO PRESS OPERATION
[0] To [8]
-- Select scale type.
OR
&
-- Select scale type.
Then
-- To set the scale type.
KEY TO PRESS OPERATION
[0] To [1]
-- Select label length.
OR
&
-- Select label length.
Then
-- To set the label length.
Key to press Operation
-- Reading Country Specification.
READING COUNTRY SPEC.
Key to press Operation
-- After Reading Country Spec, the display will
prompt MEMORY CLEAR message.
MEMORY CLEAR?
YES: / NO:
SELECT SCALE TYPE
ENTER SCALE TYPE NUMBER AND PRESS PRINT KEY
Scale Type:
0: Pole 6 Kg
1: Pole 15 Kg
2: Pole 30 Kg
3: Pole 30 Lb
4. Bench 6 Kg
5: Bench 15 Kg
6: Bench 30 Kg
7: Bench 30 Lb
8: Printer
(
BP 80/90
)
0 POLE 6 K
g
SELECT LABEL LENGTH
ENTER LABEL LENGTH NUMBER & PRESS PRINT KEY
Label Length:
0: Short
ÆLabel length up to
maximum 120mm.
1: Long
ÆLabel length up to
maximum 240mm
0 SHORT
CLEAR KEY
TARE KEY