Digi SM-720 - Scale Calibration Procedures; Zero Point Calibration; Capacity Weight Calibration

SM720 Service Manual Edition 5
21
Key to press Operation
If Yes,
-- Process of initialize.
-- Then go to segment check.
PLEASE WAIT
Key to press Operation
If No,
-- Go to segment check.
SM720 VER 29.XXX
Default Country Specification Method 2:
Key to press Operation
[9] + [3] Switch On the Power.
-- Show current country SPEC then default
Customer Specification setting.
-- Follow the instruction:
a) Press the [Clear] then
b) Press the [Print] process to next step
CURRENT COUNTRY SPECIFICATION
PRESS ‘CLEAR’ KEY, THEN PRESS ‘PRINT’ KEY
KEY TO PRESS OPERATION
[0] To [8]
-- Select scale type.
OR
&
-- Select scale type.
Then
-- To set the scale type.
54-WG
SELECT SCALE TYPE
ENTER SCALE TYPE NUMBER AND PRESS PRINT KEY
Scale Type:
0: Pole 6 Kg
1: Pole 15 Kg
2: Pole 30 Kg
3: Pole 30 Lb
4. Bench 6 Kg
5: Bench 15 Kg
6: Bench 30 Kg
7: Bench 30 Lb
8: Printer
(
BP 80/90
)
0 POLE 6 K
g