Digital Projection Ltd. E-Vision Laser 13000 WU Series Using the projector
Color matching parameters explained
The levels of hue, saturation and gain in the Manual Color
Matching menu change the color values in the following ways:
1. Hue Specifies the position of each color (red, yellow,
green, cyan, blue and magenta) relative to its
neighboring colors.
2. Saturation Specifies the level of white in each color
(i.e. how “pale” each color is).
3. Gain Controls the amount of light that goes into each
color, i.e. the lowest gain would produce black.
Rev A June 2019
page 50
Operating Guide
Notes
To Next Page
Loading...
