Digital Projection E-Vision Laser 13000 WU Series User Manual

Digital Projection Ltd. E-Vision Laser 13000 WU Series Using the projector
Factory reset
Factory reset does not
reset the Network settings,
or High Altitude mode
Information
Model Name E-VisionLaser 13000WU
Serial Number X000XXXXX0000
Software Version 1 MD03-SE10-FE09
Factory Reset
Warning
All user settings will be lost
Press OK to confirm
Press Exit to cancel
Thermal Status ►
Factory Reset
To restore the factory default settings:
1. Navigate to Factory Reset and press ENTER/OK.
2. When prompted, press ENTER/OK to confirm your choice, or press EXIT to cancel.
Rev A June 2019
page 86
Operating Guide
Notes

Digital Projection E-Vision Laser 13000 WU Series Specifications

General

Brand	Digital Projection
Model	E-Vision Laser 13000 WU Series
Category	Projector
Language	English