Digital Projection E-Vision Laser 13000 WU Series User Manual

Using the projector Digital Projection Ltd. E-Vision Laser 13000 WU Series
Laser menu
Laser
Power Mode Normal
Power Level – – – –
Constant Brightness Off
l Power Mode
l Eco will automatically set the laser power to 80%.
l Normal will set the power to 100%.
l Set to Custom if you wish to adjust the power manually.
l Power Level
This setting is only available if Power Mode is set to Custom.
Choose a value between 20 and 100, ranging from 20% to 100% laser power.
l Constant Brightness
Once a Custom Power Mode has been set, then Constant Brightness can be turned ON.
This setting will maintain the brightness until the maximum laser power has been reached. The lower the
power level the longer it will be maintained.
Operating Guide
Rev A June 2019
page 75
Notes

Digital Projection E-Vision Laser 13000 WU Series Specifications

General

Brand	Digital Projection
Model	E-Vision Laser 13000 WU Series
Category	Projector
Language	English