Digital Projection E-Vision Laser 13000 WU Series User Manual

Digital Projection Ltd. E-Vision Laser 13000 WU Series Using the projector
3D types
To display a 3D image if is first necessary to select the 3D format. This can either be Frame Sequential or Dual Pipe. These formats are described below:
L
R
HDMI 1
HDMI 2
Dual Pipe
l Dual Pipe (LEFT and RIGHT) The left and right eye images are delivered on two separate
HDMI links, which the projector will interleave for 3D display.
l Frame Sequential For sequential 3D, an external sync is required to identify left and right
frames. If no sync is available from the sequential source, the projector will generate an
output sync, but it may then be necessary to manually set the Eye Swap each time the player
is started.
L R L R
Sequential
Dark Time and Sync Offset need to be set only once, to optimize the image for the glasses in use.
Rev A June 2019
page 72
Operating Guide
Notes

Digital Projection E-Vision Laser 13000 WU Series Specifications

General

Brand	Digital Projection
Model	E-Vision Laser 13000 WU Series
Category	Projector
Language	English