Digital Projection E-Vision Laser 13000 WU Series User Manual

Digital Projection Ltd. E-Vision Laser 13000 WU Series Using the projector
Clock adjust
Clock Adjust
Date (dd:MM:yyyy) 30:11:2017
Time (HH:mm) 16:00
Time Zone UTC 00
Use this menu to set date (in dd:MM:yyyy format), time (in HH:mm format) and time zone.
The date and time set here will affect any schedule created within the Power On/Off menu.
OSDsettings
OSD Settings
Language English
Menu Position Center
Menu Transparency 0
Time Out 30 Seconds
Message Box On
l Language sets the OSD language.
l Menu Position determines where the OSD should appear on the screen when activated.
l Menu Transparency sets OSD transparency between 0% (no transparency), 25%, 50% and 75%.
l Time Out determines how long the OSD should remain on screen if no buttons are pressed. Choose
Always On to disable this feature.
l Message Box determines whether projector status messages should appear on the screen.
Rev A June 2019
page 80
Operating Guide
Notes

Digital Projection E-Vision Laser 13000 WU Series Specifications

General

Brand	Digital Projection
Model	E-Vision Laser 13000 WU Series
Category	Projector
Language	English