Digital Projection E-Vision Laser 13000 WU Series - Arc

Using the projector Digital Projection Ltd. E-Vision Laser 13000 WU Series
Arc
Arc
Top 0
Bottom 0
Left 0
Right 0
Reset
Please note that a positive
Arc value on any edge
will reduce the image size
as the projector needs to
maintain the aspect ratio.
A negative Arc value will
not affect the overall
image size.
This feature is similar to Pincushion / Barrel but allows you to apply curvature to each edge of the image
independently so you can have any combination of corrections.
Operating Guide
Rev A June 2019
page 65
Notes