Digital Projection E-Vision Laser 13000 WU Series User Manual

Digital Projection Ltd. E-Vision Laser 13000 WU Series Using the projector
Digital zoom
Digital Zoom
Digital Zoom 0
Digital Pan 0
Digital Scan 0
Reset
Digital Zoom is a
temporary setting and not
retained after an input
change or power cycle.
Digital zooming enlarges a section of the image, while the area outside the enlarged section is cropped out to
preserve the overall image size.
l Digital Zoom defines the level of zoom that needs to be applied. If Digital Zoom is set to 0, then the other
settings in the menu will be disabled.
l Digital Pan and Digital Scan specify the area that is being enlarged:
l Digital Pan adjusts the horizontal coordinates.
l Digital Scan adjusts the vertical coordinates.
The Reset command restores the default Digital Zoom, Digital Pan and Digital Scan values.
Rev A June 2019
page 54
Operating Guide
Notes

Digital Projection E-Vision Laser 13000 WU Series Specifications

General

Brand	Digital Projection
Model	E-Vision Laser 13000 WU Series
Category	Projector
Language	English